Skeleton Key Mod by Mechart

Posted on July 23, 2014 by Raymond V. | 1 comment

The Skeleton Key by Mechart.

At first glance, I'm just taken back for a minute.. not only from its beauty but also the originality of the well thought out construction.  Every which way you look at it is striking from top to bottom.  No lie.  The attention to detail is so phenomenal that you start to wonder if there are any flaws and actually start to look for them because nothing can be this perfect.  No flaws found currently. From the top, there is an adjustable 4-way airflow which closes off smoothly with a simple twist.  Under the top cap, you will find double telescopic silver plated copper pins.  These pins are off set in size and are thicker than usual for easy adjustment.  The top cap has eight embedded symmetrical squares which gives it a strong and solid unique look.  Although this is a 23mm diameter mod, do not be thrown off by it.  The way that it is constructed along with the unique top cap compliments a 22mm atomizer.  The body is made of brushed stainless steel and the top and bottom accents well with polished stainless steel.  The key symbol on the body is very clean and detailed and you can tell it took some thought into designing it.  Even the logo on the bottom is unique.  You can look at it one way and it looks like the letter M for Mechanical and when you flip it over it makes a letter A for Art -for Mechanical Art "Mechart".  Both these engravings were done professionally.  The bottom, which is the best of all, has a floating locking ring that can spin 360 degrees either way by 1/8 turns.  If at first you see the 4 empty squares at the bottom, that means the mod is locked and will not fire.  With a simple twist, the original 4 squares showing will be blocked and another 4 squares will be revealed with engravings.  When you see these engravings that means the mod is unlocked and ready to fire....and if that wasn't enough detail, when the locking ring is pulled down in unlocked mode, a layer of brass is revealed with the engraving "Pulsanti Operietur." (Latin, meaning to him who knocks it shall be opened . An inscription sometimes placed over the front door of Masonic temples or Lodge-rooms.)  That layer of brass is so unnecessary yet secretly accents the mod so well that it was intentionally crafted like that for pure luxury.  This is the difference between a great job and a touch of perfection.  Both the locking ring and firing button is smooth when twisted or pressed.  The mod includes two extension tubes for 18350, 18500 and 18650 battery capacity.  Made in the U.S.  I take my hat off to the great innovators at Mechart and look forward to more innovative designs to come.  When the shipment arrives, we will be stocking only a few online so make sure you check in from time to time as they will probably only be online for split seconds before the die hard vapers snags them. Stay posted!

Posted in Mechanical Mod, Mechart, Skeleton Key, Stainless Steel

The Nanos Mod : Smallest Mechmod to Date by MM Vapors!

Posted on July 08, 2014 by Raymond V. | 0 comments

The Nanos Mod is the smallest mechanical mod released up to date by MM Vapors!  The Top Contact is adjustable in both directions so the battery will no rattle.  22.6mm diameter construction.  Clean Rhodium plated contacts for great long term performance without cleaning.  PEEK Ketron plastics installed and adjustable to 18650, 18500 and 18350.  The Nanos works best at 0.5 ohms.  The magnets are rated at max 120 degrees Celsius.  Available in Satin, Polished SS and Brass.  Each finish comes packaged in a wood box which can be used as a 3 unit mod stand!

Purchase at Truvape's Online Vape Store / Shop

Posted in Mechanical Mod, MM Vapors, Mod, Nanos

Copper Trinity Mod by iHybrid

Posted on June 19, 2014 by Raymond V. | 0 comments

The Copper Trinity Mod by iHybrid hits hard with silver plated contacts and copper tubing.  The top cap is made of stainless steel and engraved in a diamond shape.  The bottom has a recessed built in magnetic  engraved switch.  Clean and hard hitter.

Specs:

  • 22mm Diameter
  • Silver Plated Contacts
  • Copper Body, Stainless Steel Top Cap
  • Engraved Top Cap and Switch
  • Recessed Built in Switch
  • Magnetic Switch

Purchase through Truvape's Online Vape Store / Shop

 

Posted in copper, ihybrid, mechanical mod, mod, trinity

Copper 4Nine Mod by Tarsius Customs

Posted on June 05, 2014 by Raymond V. | 0 comments

The Copper 4Nine Mod by Tarsius Customs.  This mod is 49mm tall in 18350 mod and by far one of the smallest mechanical mods in all three 18350, 18490 and 18650 sized tubing.  Copper tubing, magnetic switch with engraved logo on the bottom pin.  This Mod is made for advance users due to no button top, shorter top cap and no locking ring.  Some atomizers may be too long due to the unique top cap and adjustable threading atomizers is recommended with this device.  This mod has almost zero volt drop due to using a button top battery to connect directly to an atomizer contact.  The Copper 4Nine Mod allows for packing power in a compact size!  Be sure to read more on caution warning on this device through the link below.

Specs:

  • 22mm Diameter
  • Copper
  • Extension Tubes for 18350, 18500 and 18650 Battery Sizes
  • Magnetic switch
  • No top pin
  • No locking ring
  • No Bottom Thread Cap
  • Engraved Logo
  • Recessed Firing Button

Purchase Through Truvape's Online Vape Store / Shop

Posted in 4Nine Mod, copper, mechanical mod, Tarsius Customs

The Revolver Mod by Vapershock

Posted on May 25, 2014 by Raymond V. | 0 comments

The Revolver Mod by Vapershock has a CLEAN LOOK with a MEAN FIRING / LOCKING MECHANISM!  The body is made of brushed 304 Stainless Steel with the word "Revolver" etched to the tubing.  The firing and locking mechanism is the most intriguing of all!  Towards the bottom, you'll find a resemblance of the cylinder of a revolver hand gun.  Even at the very bottom, you'll find a laser etched resemblance of bullets and a revolver's cylinder.  In the picture above, the firing button is locked.  To unlock, you pull the firing button down, twist, and let go.  It does not matter which way you twist, it works all the same.  Once unlocked, there will be a small visible gap for the minimal throw that the firing button has.  Comes with extension tubing to fit 18350, 18500 and 18650 battery sizes.  All in all, super clean...super mean!

Latest Version Changes:

  • Inner Tube Diameter Enlarged for a Better Battery Fit
  • Contact Design Changed

Specs:

  • Brushed 304 Stainless Steel
  • Brass Connections
  • 22mm Diameter
  • Tubing to fit 18350, 18500 and 18650
  • Unique Bottom Twist Locking Mechanism

Purchase through Truvape's Online Vape Store / Shop

 

Posted in mechanical mod, revolver mod, vapor shock